Audi Q5 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
79 Posts
Discussion Starter · #1 ·
Hi all,

Off on a road trip this weekend so went to put on the supplied roofbars for the first time tonight. Unfortunately, the torque wrench is not working ie. the indicators are not moving as I tighten / loosen the nut and therefore I'm wary of using as I have no way of knowing how tight I've done them up. Last thing I want is to ruin the roofrails but at the same time I don't want the roofbars/box flying off!

Questions....those of you that have used them....did the wrench work ok for you? Also, anyone know if the wrench is a "standard fit" or if they're uniqe to each pair of bars (to prevent theft). Hppefully I can get the dealer to supply me with a new set (or wrench only if they're standard fit) before I leave on Saturday!!
 

·
Banned
Joined
·
801 Posts
In the box where it was crossbar and wrench paper is the instructions with code

There are 10 models of 2009-2013
Part number: 8R0-071-712 (D / E / F / G / H / J / K / L / M / N)

 
1 - 2 of 2 Posts
Top