Audi Q5 Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi all
Does anyone know a number i can call with regards to the help of taking out my standard halogen headlights and replacing them with the xenon with running led's, Or better still anyone on here that good give me advice on how it could be done or if it could be done

Thanks
Paul
 

·
Registered
Joined
·
289 Posts
I think you asked this already. Pretty well everywhere in the EU if you have xenon's then you need auto headlight levelling and you need headlight washers. If you've got headlight washers already then you are half way home. There are several aftermarket companies that offer this service. What country are you based in?
 

·
Registered
Joined
·
289 Posts
Several UK based independent specialists listed on the VW Audi forum. (It's not cheap!)
 

·
Registered
Joined
·
11 Posts
Currently in the process of converting mine, it's not a cheap job. Kufatec sell looms for both xenon lights and auto levelling looms. Then if you go down the headlight washer route you can also get a loom from kufatec.

So you will need:-
2 xenon headlights with bulbs
2 ballasts
2 led controllers
Kufatec xenon adaptor loom
Kufatec auto levelling loom
Xenon range controller plus holder
Front and rear level sensor with brackets and fixings
Possibly a new central electrics module, not all modules support xenon headlights

And for the washers
Additional pump
Kufatec loom
All pipe work, clips etc
2 Washer jet units
And a new bumper with the spring loaded holes for the jets

And will all need coding with vcds or audi dealer

Disadvantages of kufatec looms are the instructions are all in German and the loom is designed for an A4 LHD platform so some cables have to be extended

Hope this helps
 

·
Registered
Joined
·
195 Posts
When I made this mod on A4 B6, I had to replace the Central Electrics module (Address 9 on vag-com) for another with support for headlight wash system. Is this module that control all electrical system of the car, so it's normal that could be different to control bi-xenon. For example, my MY2009 Q5 has the module with the part number: 8K0 907 063 D
 
1 - 6 of 6 Posts
Top